© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
He is a link I did that should help you out. http://www.ferrarichat.com/forum/348-355/245239-348-window-wiring-switch-diagnoses.html
Here is a wright up I did on this subject. http://www.ferrarichat.com/forum/technical-q/356085-348-cam-timing-instructions.html
Here is a link that might answer your questions. Open the PDF at the bottom the page....
This is what I did with my 348. I can not reproduce the box because I sold the car....
This might help in finding the problem http://www.ferrarichat.com/forum/348-355/245239-348-window-wiring-switch-diagnoses.html and the install...
This box worked great for me. http://www.ferrarichat.com/forum/showthread.php?t=293764
This worked great for me. www.ferrarichat.com/forum/showthread.php?t=259362
here is a good site for $10.00 http://www.clutchtools.com/index.php?productID=38786
I would like to thank Fatbillybob on his work with his post on Degree the cams http://ferrarichat.com/forum/showthread.php?t=148917 There was 156...
How did you put in the shaft, did you press it on first.
On Page 8 Post 158 How did you remove the bearing. When you put the bearing back in, you heated it up the casting and put the bearing in the...
This is a great project. One thing you could add is a detailed how to on timing of the cams. It would include pictures of the setup of each...
I went from a two can to a later one can exhaust. It was an easy conversation. All I did was add a angle iron cross bar. I used the brackets off...
You do not need new brackets; you can use the ones on the old muffler. I did the same thing and I used angle iron and I cut a notch in the angle...
This link will help you out http://www.ferrarichat.com/forum/showthread.php?t=310804
All the wires are 14 gage except the ground which is 16 to 18 gage. I used all 14 gage on my 348.
Here, is how the relay works [ATTACH]
Here is the diagram [ATTACH]
In the first picture of the installation you would cut out the plastic piece. Solder those two wires plus one of the non ground wires from the...
Just would like to thank Full for his glass of 348 slow post . This should work for the 308 and 355 as well with a small negative wire issue. I...