© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks for all of the responses!!!! All of these are less bad than I was thinking (I was thinking valves and other very expensive things).
This is the area of the engine where the sound is loudest. [ATTACH]
Tapping sound is occurring on start up on my 1986 Mondial 3.2. It has been doing this for a while, but just for the first few seconds after...
Thank you very for the response Raemin. I ultimately was able to get the bolt free from the fuel accumulator. I used a 15 mm (if I’m remembering...
My 1986 ( Mondial 3.2, U.S. version) was not starting when it was hot. After reading up a bit, I was pretty convinced that it was my fuel...
Where is air bypass knob? Thank you for your help.
*Mondial not Montreal
I had the same issue on my mondial 3.2, 1986. I am currently working through it. You may want to check out the thread that I started, which has a...
Thank you to everyone for taking the time to respond to my question. I removed the fuel pressure regulator. To access the possibly perished...
My 86 Mondial 3.2 will start right up in the garage. If we go for a drive say 15 minutes and park it for say 30 minutes to an hour it has a hard...
I got my master and slave cylinders from. A W Italian imports in NJ. The parts were a perfect fit and the people were very helpful. Both...
Good luck with the rebuild. I may ask you how that goes at some point. Regarding the pin under the dash, the hard part is getting the pin through...
Below is a comparison between Alfa left and oem right slave. Again, I am not sure if the Alfa part would have worked if I had bled the system...
I am a first class novice but I just went through the same scenario on my 1986 3.2. I bought the Alfa part and it was very cheap 1/10 the price)....
I don’t think it could be Ferrari Classiche certified but my work around was to use some of the plastic listed below which I got from Etsy. I...
Wow. Amazingly detailed reply!!! Thank you! I get it now. I just have the foil but not the plastic frame.
Thanks very much . A prior owner removed all the stock pieces over the center tunnel and put a wood veneer there. I am trying to get it back to...
The 61022900 replacement part arrived from Poland. The graphics are good. It is a little lighter black than I was hoping for. It is very thin...
I bought the part. I will Post an update when it arrives.
