© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
The adapter is still in your head unit. Yank that little nub out. You don't need to buy anything special: [IMG]
I wonder what products their using. Maybe the units are sealed too quickly and don't have enough time to cure? The 360 certainly isn't the only...
Can't be any hotter than the hood of a car. Maybe they just didn't want to deal with it.
That's a great idea with the mount on the light!
blendmount makes a few different styles. Some that clips towards the swivel part without teeth.
Coming along nicely!
A lot of people just repeat what they read or refuse to believe the answer can be very simple sometimes. Either way, there you go. At least this...
You should have illumination and the amp wire connected as well. Also, go ahead and ground out the parking brake override. Sometimes, you still...
Yes, works fine. I have the Bose as well. You just need the harness with the RCA inputs. Read through the thread and you’ll see the links and...
You only need one, they’re both the same. If you want to support a forum sponsor, go with the scuderia audio one.
what’s your stock audio setup? Any pictures of the connections you made?
Maybe an hour, but I took my time with the connection. However, I'm also on radio number 5 so I've had some practice :D
I think most mufflers are made with rolled joints. Much cheaper and faster than doing clean welds. That said, I've also seen mufflers with clean...
See this thread for an example of a modified stock bumper: https://www.ferrarichat.com/forum/posts/144225770/
Purely speculating here, but it could be the only reason that it is recommended is that most people are not that great with a cutting wheel. :D
it could be the same mold is used with an insert leaving a parting line. Either way, there are a few that have proven the concept. I’ll see if I...
Have you tried posting in the local section?
Yes. Absolutely possible and a few have done it already. I was researching the challenge grille as well and found a few walk throughs or at least...
Heat cycling, like a chrome exhaust on a motorcycle turning gold. Different metals turn different colors.
The expansion joints seem interesting. I wonder if it cuts down on vibration: [ATTACH]
