© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Here are pics of the new black 1" thick neoprene strips that I glued to the underside of the hood. Also pics of the "chinking" of the gaps...
silvergts Will post pics this weekend when I get back home. Again nice, ingenious really, fan mount design. These ought to be installed in...
Not to put too fine a point on it but you really don't want slop in the linkage at all otherwise the front and rear banks will not be synched and...
Resurrected this post from the General Technical Forum and added my latest experiences this weekend with installing Hayden fans, a proper radiator...
9 years later and I too have always had issues with the cooling on my 308. After reading this thread I finally decided to do something about it....
Does your bumper price include the new brackets that you probably had to purchase to mount the new fiberglass bumpers? Also, the grill price is...
Where did you source the Euro front grill to match the Euro front bumper?
Do you still have the front bumper? Assuming it is a Euro bumper. Please confirm. Also might you have the Euro front grill that matches the...
If you are not getting any change in engine speed when you screw the idle mixture screws in or out then cylinders 5 and 6 are not firing...
PM sent.
Seriously, does anyone believe that the Ferrari thermostat is worth $130? If you do, I have a bridge that I would like to talk to you...
If you have a stock engine then my guess is that you are running too large an idle jet in the car. I have a 1976 dry sump with P6 cams and high...
I had off idle hesitation for years and tried everything. Went back and re-synced the carbs and allowed slop in the linkage to avoid binding....
Sledge My experiences are similar to yours except that I had installed 60 idle jets so that I could screw in the idle screws further as is the...
Mark, Saw your post. Sounds good that no welding will be required. Sounds like there will just be metal to take out. Only question that I...
The link to ebay shows an Air Conditioner Clutch which has an electric engagement function so that you are able to turn the AC on with an electric...
The engine was tested using a dynojet machine. Has a fan blowing air over the radiator to keep the car from overheating but that air really did...
Well, I am still waiting for the dyno guy to send me the records of the dyno runs I did on Thursday. My first pulls were just under 200 hp at...
Mark, Would love a better set of induction manifolds/carbs if I could afford them but the Webers are paid for and work well enough and the...
Mark, Called and left a message. Head and intake manifold (bolted together) are on their way to you by FedEx. Expect them Thursday. No...