© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
John, Not all of the tools are shown on the web site. Ferrari has a few styles and sizes of their spinners. Give me a call for the details....
Enigma Racing, Old timer tools work better than a hammer and some tools have a nice non-metal parts that are not metal to metal on the torque...
Hello John, I have not been posting on this Ferrari Chat as I did not have a tool designed for the Ferrari spinners yet. But I found that leather...
I happen to be reviewing old post and noticed that my contact info was way out of date. Here is my current website info Sarto Rocheleau - Home...
spook64, It took a while to open your pictures. I found that the leather will move under torque and drilling two holes secured it. After you...
Spook64, The tips on the wrench go behind the spinner ears and take a lot of force and stop the wrench from popping off when force is applied....
Hi Andrew Stevens, My wrench is set up that it works in both direction, on or off, the same way with just a 18" breaker bar. And the torque...
Hi Spook64, If you can attached the leather to the round designed wrench that would extend the life of the protection. I grounded off the sharp...
I just reread all of my posts and I just hate it when my fingers can't spell. After review there are things that I want to add. To all that...
Spook64, I did do a copper clad socket wrench that I used in place of my current leather clad one. It was for heavy use by auto shops and tire...
Mikeyr, I saw the spinner remover that Napolis posted. That will work and cost every penny of the $325.00 to manufacture. To compare my tool...
Edward 96 GTS, You can read my earlier posts or you can try this site. Let me know if you still can not see the pictures. ENTER THE SITE...
Thanks for your input. I tried a lead hammer and it does work. My panasport wheels are to close to the spinner -see pictures- and at my age my...
Kerry, thanks for the information. I have since spoke to Mike and his tool looks like the one I purchased from Blaum tools in Forida that is...
Yes, my mechanic said that he broke a breaker bar extension trying too remove a spinner. That can not be good for the wheels. With a hammer you...
I have restored a 1967 lotus elan coupe and had problems with damaged wheels and spinners. Nothing seem to protect them, So I developed one for...