© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hi. The codes are B1302 C1024 Thanks
fault comes up and cancels the bumpy ride function. code reader has identified a fault with the rear right sensor. i would like to start with...
can i ask 1) once the airbag is removed and the connectors disconnected, is it a matter of pull the control panel hard to remove it ? and replace...
Thanks so much for the guidance.. Grateful to see such detailed DIY write ups Thanks again
need some guidance please. after cleaning the indicators with a only a lightly moist cloth this weekend the indicators have stopped working. all...
can you claim on warranty? as its a driving hazard?
yes. LHS ECU was faulty. the LHS contains the immobiliser info. and consequently, due to the ECU fault the car would not crank
last year had an issue where the car would not crank on an erratic basis. changed battery, starter motor, wire harness, extra...
unfortunately has been an issue on the F12 as well. my car had one unit replaced when it was under warranty. mine is now coming on to being 10...
I have the 18 way seats in the GT3. some would say it is harsh esp in town driving conditions. the GT3 is a track car made for the road. so it...
I have a 992 GT3 touring and F12. here in the UK it is not unknown for 812 owners going back to an F12, as the F12 is pure drama and raw, the...
the tube is there as a water drain... where the tube ends is different on both arches. sequence: tube end, wheel arch trim, wheel arch space....
oh no...sorry to hear about your loss. high rate of thefts happening in the UK as well. Ferrari owners car insurance premiums have jumped up...
I finally got round to replacing both the vents. I replaced both with ones that have been fabricated by Ferrarichat member pezrod aluminium mesh...
thanks for your reply. service done 200 miles ago by Ferrari dealer. full Ferrari history...nothing has been skimped..
I am consistently getting an oil pressure reading approx 1-1.5 bar above 'normal' at any range. I am thinking of changing the oil pressure sensor....
:D......sharp!!!
I have a carbon cupholder that i would like to DIY. 3POINT8 has confirmed my suspicion that it is a protracted endeavour..... Previous experience...
Can anyone offer guidance on how to remove the cupholder on an F12. Thanks
in the UK the 456M Manuals are dearer then the 550 . its the joy of having a family car with the flexibility of manual gearbox....... 456 manual...