© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Please do. Do you have any idea on when that might be?
Hi, where can I buy the gears?
Ok, the connector has 6V on it regardless of the RPM of the engine. That's between the green/black and the blue/yellow
Thanks, I will check as soon as I get some help
The coil works since the vacuum valve opens when I put 12V on the pins. I have checked and the blue connector is on the right valve as per...
Yes, I understand that is the correct operation. But my valve only opens if I have re-routed the hoses so there's permanent vacuum to the valve...
Bah... I just read the reviews on this adapter on ebay and it seems as more than me have had the problem with the pins being too wide...
I bought this: https://www.amazon.se/dp/B08NPWNTQW/ref=pe_24982401_503747021_TE_SCE_dp_1 However, the 3-pin plug doesn't fit into the connector...
Finally got some time to try and fix this again. No luck however... Regarding the bypass valve: I bought two new (used) vacuum solenoids on ebay...
If they removed the thermocouple from the bypass, I would assume that I still would have the box that it where connected to, the one you have. But...
I do not know, I have the car upon my lift and I'm alone so I cannot see if it opens or closes. To my ear, nothing happens when I rev it up. And...
I rerouted the hoses as per your suggestion. It made no difference to the SDL
Btw, I noticed that there is a empty hose connector and a cut off hose below the pump. Is this normal? [ATTACH]
This is how it looks where the Cat ECU is located: [ATTACH]
No, I don't have any thermocouple at the bypass valve. Se pic. [ATTACH]
I have checked again and I cannot see any connectors in that area that are the same as the one that was connected to the original Cat ECU. I have...
I have all of the above. I started to change the Cat ECU, then I changed the thermocouples. When that didn't help I disconnected the Cat ECU and...
Regarding the bypass plugs, I plugged them into the cables that goes into the Cat ECUs. Is that not the correct way to connect them? I certainly...
I just removed the Ferrari stock Cat ECUs and Thermocouples and replaced them with the Technistrada ones. Not sure on how I could have gotten the...
Btw, I forgot to mention that I previously removed the thermocouples from the exhaust and plugged the holes. I still had them connected to the Cat...
