© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Anyone? UPDATE: The buttons on the back of my steering wheel worked for a brief period, but the behavior was strange: The up and down on BOTH...
UPDATE: The buttons on the back of my steering wheel worked for a brief period, but the behavior was strange: The up and down on BOTH sides was...
I will disassemble the wheel to get the PN. Here are some pics that show the offending toggles/buttons below [ATTACH] [ATTACH] [ATTACH] [ATTACH]
2007 599GTB. Two toggle buttons and center buttons on the back side of the steering wheel are non-responsive. These are the toggles and buttons...
I do not know if the 430 has this but I had a similar issue with my 599 that I chased to a brake switch on top of the brake pedal arm. The...
Looking specifically for the steering wheel wiring diagram to debug the rear buttons, but would appreciate the file with all the wiring diagrams...
Reviving this thread. On my 2007 599, I diagnosed the problem to the switch that is at the top of the brake pedal (green dot on the picture). At...
It was the hose on the left intake manifold attached to the elbow at the rear near the firewall. I have a video of it. Had to remove the manifold...
Buttons on the back side of my steering wheel stopped working about a month ago. Both sets of buttons and all functions, so I dont think it is...
UPDATE: smoke tested the 599, found leak. One of the hoses on the intake broke. Code is gone.
Question (related to the 599): If this procedure is not followed, will there be error codes thrown? I just had my battery disconnected so that I...
I just finished replacing both fuel pumps and both rear bearings (not related) on the 2007 599 GTB. After replacing both of them, had to run the...
Completed the job yesterday. Tedious but very rewarding as I had a chance to clean everything have the experience fully documented in a time...
I’m sure @360trev will be in touch with you on this! Sent from my iPhone using FerrariChat.com mobile app
I will share my experience. In order to program the ecus, there is a connection inside each ecu that is not pinned out that needs to be accessed...
This job would be a lot easier if I had figured out the best way to loosen and tighten that one bolt in the back bottom corner of bank 1. I...
HGTE if you can find them. Sent from my iPhone using FerrariChat.com mobile app
I have seen (don't remember where) folks applying sealant to the solenoids to slow down or prevent leaks through the device.
WOW. I just came back from road testing the latest ECU tune on my '07 599 F1 from @360trev that @sammyf downloaded onto the two ECUs. What an...