© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Just a note here that I added a slight radius to the bottom face of mine (ground on). This helps prevent marking if you ever need to use it. I...
Certainly happy to do that (also happy to ship it back if necessary).
I have the means to measure all that alternatively. (Started my career with a brief stint as a Quality Inspector - could also model it up in a few...
I'm glad that info was useful to sombody. I've eyeballed photos of various rear hubs and not seen anything that looks quite right so far. Keen to...
[ATTACH]
That company would almost certainly make those TWO (I found another one, as above) machining changes wouldn't they? The quality won't be SKF but...
Corrected below. (Now have a 360 bearing on my f355)
(360 bearings are circa £600 and available. F355 circa 1400 and not available at the moment.)
Was posted on Facebook. His lad and another person were in the car. The other person was unharmed and his son had moderate lacerations to his...
Interesting one here; The Ferrari 360 (and likely F430) front/rear wheel bearing is the same as (read: identical to) the F355 FRONT except in 2...
Just to update this; I've found the Solenoid valve used for the exhaust valve to be a: PIERBURG ® 7.02256.29.0 also Ford Part Numbers 6580879 6580881
Mine are textured. 98.
I have a ["Ugly as hell" apparently] Becker unit (probably it was removed from a 360). I put a Sony back in mine as it had an orphaned CD changer...
That's a noble quest Matt. Are you an individual or a company? Having had a Porsche before; the parts situation is quite the cause for despair on...
I could model the lid, if I can find time!
Nice work in this thread! I found it because I had considered doing this and other bits of the console. I also have an Ender (and 20years...
I didn't know that! However the lights were turned on while I was in there so it's probably not working. Thanks for the steer! I guess I should...
Well the diagram helped a lot! Thank you! Next up the bonnet bulb not illuminating, noticed that while I was in there. Haha
Relay F changed, lights working! Had a compatable one in a tool cabinet!
Dip/main beam headlight is about all that's working I think, but will check when I can. Thanks on the relays - a very useful nugget of info....
