© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
[ATTACH] I haven’t found a specific stripped down wiring diagram for the Challenge but again - there is info on Eurospares and Maranello parts...
I’m also sure a lot of guys trackside would be helpful in sharing specific info you’d need ?
[ATTACH] I’ve seen photocopied / scanned parts manuals people are selling on eBay. Clearly a copyright infringement - so I’m not sharing a link....
Sent!
No - the plastic will absorb what it can, then the soft cloth will remove the excess - it won’t have any residue etc … just wipe it off.
No prob - I’m assuming your roll cages are black ? I changed the decal for mine to work on a white surface - so lmk - so I can change it to black...
Any off the shelf spray silicone from a hardware store etc. Clean the part thoroughly, put some newspaper down and spray the part until it’s...
Nice ! I’m happy to send you the digital files then you can have it printed. Any sticker shop / bureau can do it. What are the roll cage numbers...
YELLOW LENSES [ATTACH] [ATTACH] [ATTACH]
HEADLIGHTS WORK IN PROGRESS PART 1 Started looking into the headlights. Pretty bad shape - one of them had been opened up in the past and had...
https://www.ferrari.com/en-GB/esports/ferrari-esports-series You may find, entering on here will give you basically everything you need!
You've got a couple of good options here. The most accessible, and the most 1:1 with your car is Assetto Corsa Competizione. You'll be able to...
You bet! Probably not nearly as hard as you track your car, but its going to be tracked for sure. Thanks Peter. Good luck with the sleeve ......
Been a while since I posted an update ... life sometimes gets in the way ... But today, we broke the silence hopefully, and some bits and pieces...
FRONT END WORK IN PROGRESS BEFORE: [ATTACH] [ATTACH] [ATTACH] The cover plates are out for powder coating. These cover up the front...
Peter, the finer pieces were outsourced and CNC milled, based off the the original parts. I was told laser cutting doesn't work on polycarbonate...
WHEELS ON! We have a rolling chassis. Finally time to move it into the garage. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
CALIPERS COMPLETE [ATTACH] [ATTACH] [ATTACH] [ATTACH]
SOME DECALS [ATTACH] [ATTACH] [ATTACH] [ATTACH]
SEAT FITTED. Steam Cleaned. [ATTACH] [ATTACH] [ATTACH] [ATTACH]