© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Yep, It looks like the hose that runs from the T piece to the vacuum can has been replaced with a slightly larger ID. It rotates freely on the T...
Cheers yelcab. The car just had a full engine out service so I hope it’s just one of the check valves that’s bad. The engine is running perfectly...
Many thanks, will do. Any idea what psi reading I should be getting. Many of the hoses are just pushed on without any clamps so they could leak I...
I didn’t take them off and check flow but as the vacuum was holding it suggests that they are not allowing flow back. If my psi figures are low...
Thanks again - so I hooked up a gauge from the vacuum tank - on cold start idle the vacuum measured 10 inch/hg (5 psi). On stopping the engine the...
Many Thanks to all that have commented. I have now located the hose from the t-piece and connected that to the vacuum tank. Prior to connecting I...
Many Thanks, I don't suppose anyone knows the diameter of the hose.
Thanks so much
Thank so much - that's perfect
i’m 5.2 but assume the pipe is in the same area. I’ll take a look. Really appreciate the help.
@Timmo , cheers - The feed to the vacuum tank is missing altogether so wanted to correct that first - just can't work out the pipe route from the...
@yelcab Many Thanks my friend. I don't suppose you know how the pipe routes from the throttle body to the vacuum tank. I must have that pipe...
Hi All, My Air injection system plumbing appears to be seriously screwed up and I'm trying to follow the diagram in this link....
