© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
The new adjustable FPRs re-located. I also replaced the broken / not locking 9-pin connector in the left side of engine bay with 2 super seal...
Later today I will upload a photo from the new FPRs (I replaced both) as I relocate them due to confined space. I used adjustable FPRs bu...
Engine finally works just fine! After an excessive maintenance work and preventing replacement of many sensors and parts, I had an intermittent...
While waiting for new FPR I opened up the defective one for check. The photos are self understood. The moral of the story is that that aged...
Beyond this, I noticed that all this mesh of wires and relays in the trunk of Mondial T shall be addressed aiming to a better reliability. I...
Mystery solved! A defective FPR is the cause of my nightmare of the last days... My FPR, even is delivering at the correct pressure of 3.8 Bar,...
I tried my old TDC sensors (540 ohms), they. gave a different magnitude on the pulse. The wav form is ok, but unfortunately I have only the...
Both sensors are new and same type, same resistance at 860 Ohms. They generate the same week garbled signal. Tomorrow I will try to take photo...
Mondial T with 3.4 engine, see below from WSM Motronic 2.7 check list No. 13 [ATTACH] It is clear that ECU expects a resistance as per the...
Even this an old thread I hope that you could respond. I am a little confused.... What should be the ideal point of tuning? A reading of 465mV or...
Yes indeed, it was very easy to slip my attention. Just I got 2more turns by hand double checking all timing marks. Initially I thought that...
Yes, agree. Already belt supplier accepted the defect and belt replacement has been arranged. It's my mistake that I got the belt since September...
Please see below photos from brand new Dayco just out of the box. Only 3-4 turns by hand.... Is this ok or this is some defective part? Old one...
I would never operated the engine without coolant to protect the water pump seal. However I agree that thermal cycling is meaningful to have the...
Old but always popular topic I think... I used a set of head gaskets made by Nava in Italy, visually almost identical with Elring and with same...
I know this an old post but maybe someone can comment. I used a set of head gaskets made by Nava in Italy, visually almost identical with Elring...
Are still available?
Sorry, you are right!
Any contact details? Web Site?
Do you have any particular brand/web site in mind?
