© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Better buy that Bora before Beverly Hills Car Club buys it and lists it as Just out of long storage with beautiful patina. Anyway I have my new...
I think I'll try jacking up the front for a gravity assist and use the suction device at the slaves bleeder valve. Will report back if that worked.
I may have the gadget that sucks the brake fluid back to the bleeder. I’m wondering if jacking the front if the will allow a gravity assist….
Neighbor called 5-0 when he saw me swinging a chicken around over my head.
Sounds like fun.
well I’ve gotten it out and I have ordered a new one. Not interested in rebuilding the old one.
By Neptune’s Trident!!! Two hours to get this out I was able to get the banjo fitting off with a ratcheting box end 17mm wrench. 2-3 clicks at a...
There’s two nuts holding the master in place on the sled it goes back and forth on. The bottom nut was quite tight. I needed a half inch drive...
This thread has become even more enteraining. Heres a boring question: How big a PITA is it to replace the clutch master cylinder? I though...
by this do you mean increase the size of the factory opening for reciculation? That would of course render the flap useless, although I see no...
Find any missing 10mm sockets yet?
Good luck with it Ivan, you're much braver than I am. Why the major surgery? Dean
Ivan, any way to increase airflow through the a/c system? I actually think the main issue is too small an air intake especially in the recirc...
Finally all "issues" resolved. Car running great and fans working correctly. Now just need to have fun driving to local car shows and enjoy.
follow up/problem solved. Just back from my local monthly car show. When I go to the show the car turned off fine. it was 80F out. No problem...
I’ll listen for a relay and see. the lightbulb circuit bleeding current is interesting because when I closed the door the engine stopped. I...
Thanks Ivan, thats a good idea. Since its intermittent I will have to wait until it happens again and start pulling fuses, except the fuel pump...
any of the experienced Boranistas here ever have their car keep running after pulling the key out?
too late to edit the above but... the wiring diagram in the owners manual doesnt show an ignition relay but the MIE wiring diagram does show one...
Heres an issue I could use some help with. Only happens when the car is hot. When I turn the key off, the car keeps running! I put a new...