© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Looks max is about 400F.
How hot should I get it? is there grease behind it
I attempted to do rotors and pads on my 94 348 spider. Front went well. The rear rotors not so much. 3 of the 4 shoe pins broke off. I attempted...
I just had engine out done. I know fluid was changed 2 years ago. I’m assuming it was changed again during engine out last December last year. I...
I have added no fluid prior to leak or since The fluid was above the max line just a hair. I pulled out some fluid (anbout 1/3 cup) and got it...
The fluid level is below max line. After each drive I have checked fluid level and it’s about the same. Level is at seam of the reservoir I think...
I found a nice puddle of brake fluid under my car about a month ago. The cap had leaked into the trunk and eventually got on the floor. I thought...
I have been following this thread. I have a 94 spider, hot start issue. I’m assuming POLO35 still has the hot start issue. I haven’t done anything...
I used a heat gun and had great results. Took 3 or 4 tries. I heated the panel up to about 180/200 and used an infrared temp gun. I left the...
Did you happen to know what temp it was when the panel became playable? I was thinking about making a wood press and leaving the leather on [ATTACH]
Got my Rock auto FPRs today. They look good, all threads match up. I got one in but, struggling to get the far bolt in. I dropped the bolt twice,...
I got a 94 spider , with hot start problem. I got fuel pressure regulators coming Tuesday.
I got on Rock Auto wait list and got a notification today. They got some in stock!!! Only took about a week, I feel lucky it was so quick. I...
[ATTACH]
I have a bad fuel regulator also on my 94 348 spider. I found a replacement at adapt motorsports, they look good and look like they can use the...
I ended up using a heat gun and a Dremil to shape the bulb opening in the tail lights. I got the original sockets to twist in. All my lights work...
Since my issue originally was related to front fog light short, I looked into my tail lights( which work) and reverse light not working. I found...
Awesome just bought on Amazon !!!! thanks for all the help. [ATTACH]
My original problem is solved . The yellow and blue was shorted at the socket. I attempted to put new bulbs in but it shorted out the 10a fuse....
