© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I finally got around to tinkering with this yesterday. It is a US car. I run the fog lights all the time. I replaced the fuse labeled "fog...
I have an '86 328. When I turn on the parking lights and or headlights, the dash lights do not come on, nor do the sidemarker lights. The...
I know there have been posts regarding this topic in the past, but I've not seen any with the strange twist I'm going to describe. The right...
I changed the spring today. The new spring is a few millimeters shorter than the one I took out of the car. By "piston", I assume you are...
Is this the cap you are referring to? Just for the heck of it, I put a wrench on it earlier, and found it to be on very tight. From the position...
Live in Pearland. But drive the 328 to the gym on Kirby a couple times a week.
Is it safe to assume that I'll need to drain the oil in order to remove the pressure relief valve and change the spring? Is there anything else...
Thanks for the information so far. Very helpful! Now, where on the car will I find the oil pressure relief valve, and the oil pressure sending...
My '86 328 has had a steady increase in oil pressure over the last few weeks. When I purchased it 6 months ago, the oil pressure was pretty...
That would make sense. I've got chassis # 64711 (US), build date May '86. I'll see about getting my hands on a 12mm allen wrench to try. Thanks!!
No, actually the oil drain plug on my '86 is an Allen wrench. It is also vertically oriented, rather than horizontal as on '87's and newer....
What size wrench (Allen?) fits the oil drain plug on an '86 328? Thanks, Brian
WAHOO! It's out!! Pulley/gear puller got the job done. With that off, and the lower A/C mounting bracket removed, there was JUST enough room to...
I'm slowly making progress. Used an impact wrench to remove the crank pulley bolt. But now I can't get the pulley off. It won't budge....
Is there any chance the crank pulley bolt is reverse thread? Before I get into this thing any further, I want to make sure that CCW is loosen not...
Actually, I hadn't gone searching for the engine mounts yet. Are they easily accessible? How much lift could I expect to get by doing that?...
OK...I may try 1 more thing before calling the tow truck. I think (90% sure) that if I remove the crank pulley, then the alt. will come out....
Thanks for all the guidance so far. Unfortunately, I gave up the fight last night. After removing the lower A/C bracket, and the A/C belt, there...
Here are some better pics of the A/C and it's mount. I could not see a name on the A/C, at least not from the angles I viewed it from. The A/C...