© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Using water instead of a spray oil (wd40) might be a better idea. If in fact noise is from belts, first make sure they tensioned to spec. second...
I have had good results using mid. 80's E class benz hood insulation, easy to find and work with. Note, fabric side faces engine.
Compressor should be no big deal, but the clutch is a diff. mater. I have seen a lot of cars come through the shop with the wrong a/c clutch and...
You most likely have a failed temp sensor that sits in upper tank of left radiator, very common.
I have done several 355 belt service in car, cars that I have regularly serviced and had at least one engine out service, so no surprises. I have...
Can you post or send a picture of switch, I may be able to help.
The method of head removal (cams out) that never fails for me: Add string to a end cylinder, enough so piston cannot go past TDC. I like to...
What you will most likely find is one of the numerous adjustment points in the shift linkage (internal and external) has moved,allowing the...
Just an observation: Looking and comparing the "before versus after" O2 readings at various operating conditions such as rpm, load, and...
Try adding leak indicator dye, run until t-stat opens then let it sit over night. using a black light inspect area in question. I have found many...
Hello, what you are hearing is the multi groove belt that runs alt. slipping as alt. is trying to recharge battery. Fix is going to dayco brand...