© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Alright! I got it open. Thanks for the snap-ring warning and procedure info. I pushed out that bearing with the red seal using only its inner...
Thanks a lot fellahs! I'll let you know how it goes.
The flywheel is out of the bell housing (and off of the tranny) but still together. I'm trying to separate the inner piece, which contacts the...
I've tried holding the inner part of the flywheel with my jig and tapping the outter piece (the part that the starter cog connects to) with a...
How shall I disassemble it without prying? In a normal situation should it fall out / open when those bolts are removed?
Im in the middle of rebuilding the flywheel on my 1999 355 F1. Im having a bit of trouble taking the flywheel apart. The flywheels grease had...
I have a 1999 355 F1 Spider. My question is in regards to clutch material and performance when in use with the F1 system. I have recently...
Thank you so much for your help. I truly appreciate your prompt and thorough responses. I will be sending my clutches in to be rebuilt as well...
My 355 is a 1999 F1 spider. I am getting ready to put in another clutch. I had replaced it roughly 10,000 miles prior. I believe the rapid ware...
