© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I'm interested in the darkish small blob with lines radiating out from it at about 4.30. I had a crank pin on a Vincent HRD motorcycle fail many...
Superformance in England
Good news, the brake problem on my GT4 is fixed. New seals in the mater cylinder and the pedal is back to a short hard one. By the way GT4 master...
Ok, here is whats happening. Adjusted the hand brake as per Birdmans page. Did as Brian suggested and pumped the pedal with the engine off and...
Australian 308s' don't have a flapper. I have seen a 308 vacuum bottle listed as a spare and E-type Jaguars have a vacuum chamber but perhaps your...
The car has been standing for about 3 weeks and upon removing the check valve there was a loud inrush of air. This shows that the check valve and...
Yes I own an E-type as well as a 308. The E-type is a slightly different car than the 308. It is softer and a slower steerer so makes it more...
The 308 IPB is very sadly lacking in its information. Where is the brake vacuum check valve located and also I have seen a few mentions of the...
Thanks blokes, I'm not loosing fluid and it is a hard pedal, just a long stroke. A vacuum problem it could be and a fluid change is scheduled.
Dear All, Before I delve into it, can anybody point me in the direction of an illustrated parts break down of the brake master...
Ok, I have read all the thoughts, now how do I identify what valves I have in my car My 308 GT4 has done a lot of Ks' and is running very well....
How many of you would be climbing out if she was climbing in to your bed? None I'll wager
Well I will have a look again. I have owned this car for 13 years now and do all work my self and have never seen a removable panel here. Some...
G'day Harry, I take it your talking an access panel in the wheel well behind the wheel? I don't have any sort of removable panel...
Thanks Jim, I have removed the two small panels behind the fuel tank and accessed those two clips. Are there any up the front...
How tight are the A/C hoses to get out? I have just tried pulling mine out but they only move about 6" and then lock solid. Thats with someone...
Yes that right it does. Also to add substance to it being original is that there is a folded steel ledge welded to the steel fire wall that runs...
I believe the chances of you buying a dash mat off the shelf would be pretty slim. A couple of options though. Buy a larger dash mat and cut it to...
Here are a couple of photos of the panel in question. Its to the left and behind the A/C compressor. Phelps. [ATTACH] [ATTACH]
G'day Rob, No I hadn't got that far. Like all good things Ferrari (or mechanical) the object of the excersise was to just remove...