© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Out of curosity - what do you use to hold the sprockets when you torque them?
By coincidence, we passed by Lovere on Saturday, saw one Dino and the Aquarama boats, but had no idea about the event :) took a picture with the...
Thank you!
Thanks! Philips or slot screws?
Does anybody know what are the correct trim screws for the rear boot carpet panel in a GT4? Flat head or cup washers? Chrome or black? Thx
The mounting box for the retractor does not exist in early GT4s.
Thank you, I will have a look at the coils!
After servicing my distributors (new points, condensers), my rev counter works only intermittently. Half of the time it shows 0, half of the time...
The wide angle polyurethane belts (60 deg) are designed for industrial drive applications - high load, high speed, limited space. There are more...
GT4 Manual says between 5,5 and 6,5 bar @ 6000 rpm and 100 degC oil temperature. If less than 4,5 bar @ same conditions, you should find out why....
Unfortunately I have never driven a 208, I only know the 308. But I think you can compare the 208 vs. 308 experience to driving a BMW e36 320i vs....
Had similar symptoms, was caused by an old battery. Changed the battery, all good since. Hot starter needs a little more current to engage, this...
Barry, do it exactly how you describe it - 100% correct. Harry
Fave, do you use the fixing point for the rear seat to fix the belt? If yes, do you know how strong this is? Regards Harald
Your problem is caused by fuse boxes going bad. What happens is that the rivets get loose, resulting in bad contact. You can exchange the fuse...
Only one word: brilliant idea Regards Harry
I would exchange brake hoses first. With more than 10 years old, they are likely to be the culprit. Regards Harry
I had the opposite experience with Dinoparts. There was one wrong part in the shipping (steering wheel locknut instead of the special socket to...
Maybe I missed this in your previous posts - but it seems like you did not remove the cylinder liners, i.e. you did not change the o-rings. Is...
Some pictures how I did it. First picture on the rear bank, second on the front bank exhaust valves. The arrangement is good enough to define...
