© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
I have a 1983 308 Qv and as all 308's it had a heat problem in the cockpit even with all the vents closed and the heat turned off. I know this...
I live in south texas where the summer days could and will see the high 90's to low 100's. For sometime I have been dealing with a cooling problem...
When I purchased my 83 308 it did not have a air pump. The previous owner or mechanic removed it and these rocked scientist used silcone to plug...
Hey fellow Texans the Texas Canonball is this saturday Night for all information go to www.texascannonball.com. This should be fun...
I have a 308 and my concurn is mounting a plate on the front will it decrease the air flow across the radiator?? and increase the engine temp....
Ok... Finally found the knocking problem. It was a bad cam pulley drive bearing not a valve knocking. Wow that was a pain to change. I will start...
LSU.... Geaux Tigers.... That should tell you where I relocated from... Thanks for you help...
Question if a timing belt skips, how many teeth must it skip before a valve will be bent???
Does anyone know of a good mechanic to work on my 308 with out having to pay a nose bleed.
What is the cannonball site address???
Again Thanks for all the help, The procedure I followed is at http://www.camerafilters.com/ec/timing.htm I purchased the car with 69K miles 4...
Hey Guys thanks for all your valuable information. I did the timing belt change and I did not check the valves because there was not problem with...
I have a 83 308 qv. and just did a cam belt replacement. When the engine runs bout 2-3 minutes the valves will start to clatter like no oil is...
I have a 1983 308qv. When I turn the headlights on they keep running until it is turned off. I changed both diodes in both motors. The circuit is...
