© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Also consider replacing the microswitches as they will be VASTLY easier to access with the top off. If not replaced, then by all means have them...
With that being said, I’m assuming you need to order all new gaskets and retaining rings? I’m actually surprised they don’t come with them. (Ok...
Friends, Like many, my fuel pump plastic is failing. The dreaded raw fuel smell. I know about the JB weld patch/fix, but my car is apart and...
I bought the new one from Eurospares, and the eurospare approved flap is in fact aluminum. My friend has a body shop and is painting it as we...
Its the bottom mounting point. The other two points are ok, the big point (the biggest piece of crappy plastic) on the roller, has a crack, but...
Well the car wins..... Its going to the shop. When trying to open the top to resync the capote flap on the driver's side the top was acting a bit...
yes you push the microswitch lever towards the microswitch body as you have indicated. You're also correct that loosening the screw would allow...
If you adjust the cable for down that was my exact question, how do you get them to ensure full up??? My mech synchronized them before with some...
Now the next question, how to I adjust the drive cable??
What, you don't want to read almost 200 posts? LOL But it all started when the top failed in transit and wouldn't go all the way stowed. After...
Have they been doing your service for a while, have you been happy with them? I spoke to them on the phone about a problem I was having and they...
Also, great questions, I will dig my head into there and see if I can get some for you. A lot of my slider knowledge from the capote flap and...
Your hypothesis is not invalid. I had an issue with the drive cable before where it somehow got the capote flaps out of sync and they wouldn't...
No, I wedged my phone back there and used the front camera to take random pictures until I got that one. It was a blind shoot on it.
The microswitch body is adjustable, you can see it in the bottom of the attachment point. Its an eliptical hole that allows adjustment forward...
Correct sir
The Launch has a capote function on it, but doesn't provide ANY data. I tried getting the module info, faults, and live streams..... got nothing
Now what on earth is that screw head? Torx, hex head, or philips?? I guess I need a hot second to see what fits. Its dang near impossible to get...
We shall see. I'm going to review the WSM for the top, there was something about the capote adjustments and the microswitches. I just have to...
I can't thank you and John enough for walking with me through this journey!!! While I'm far from the end of it, I never could've made it this far...
