© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
IMHO, the 17" diameter is the maximum size to look proportionate with the rest of the car. I am not as enthusiastic as the other commenters....
I just came across this old post and thought I should add some comments from my experience with the Michelin XWX. The Michelin XWX is a very...
FYI, Bosch went to brass due to there now being alcohol in the gasoline and thus the steel ones will rust.
You MUST change the cam belts AND the tensioner bearings as well. I would not even think to start the engine w/o changing the cam belts and the...
24. Mark S
Steve, I agree with everything that you say.........even your quotes at the bottom! I have stock brakes and I am merely trying to find the best...
From my initial research, it looks like the Ferodo DS3000 pads are a "race only" pad and with it comes more dust and more noise. The DS2500 looks...
Mike996 is correct. I checked and the AC Delco battery, as of 2005, is now made by Johnson Controls. GM soldout. This might be another good...
Anyone that states that, has not tried the Cibie "Z" beams with the 90/100 watt H4 lamps with the 30 amp relays and new 14 ga. - 12 ga. wire from...
I will look into the Ferodo pads. I have been looking at the Hawk HPS (High Performance Street) pads, which I have heard good things about and...
I have to agree with Steve (enjoythemusic). The 308 braking system is, IMO, minimal. Anyone downgrading the system is looking for trouble. Your...
If you had standard American Headlamps installed in you car and converted to the Cibie Lights (or any lights) with the H4 lamps, the wiring is...
Sears? You have got to be kidding. I like AC Delco batteries. I have been using them for over 35 years and have never had a bad one or any...
Superformance from England does have good prices but it also depends on the Dollar vs Pound. The shipping fees they charge have always killed the...
Rear calipers are actually Prosche 914/6 GT except for the bleeder location. I too purchased these Brembo rotors during the Tire Rack closeout...
"Keys for Classics" is the best source and the most reasonable. The Silca blanks are only a few dollars from "Keys for Classics" and you have...
I recently stripped mine, glass beaded it and had PowderCraft in Exton powder coat it in red wrinkle. It looks fantastic. Glass bead it first...
Quote: Originally Posted by turbos7903 WALNUT...check out the Garage tour thread. we are for the next several saturdays meeting at various...
The SKF bearings with the blue seals are commonly used replacements for the Ferrari bearings. The SKF number is VKM 22380. The box states Alfa,...