© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Teflon lined Aeroquip 666 is also a great choice - but I noticed that Ebay is full of 'teflon AN pipe' of uncertain origin. I would avoid that...
I dont post here often but this is important. 4 years ago I sent my 348 in to a local independent service centre (highly recommended by the dealer...
Hi Randy, You are right. A degree of vacuum is not out of the question if you check it soon after starting or on a cold morning The 2 way valve...
For clarity the last sentence of above post should read : "My guess is removing the canister unstuck the VENT valve by disturbing it." It occurs...
There seems to be a bit of confusion about how this system works. Let me clarify. The tank filler cap is sealed. The tank vents through a series...
Yes. Bust clutch slave. Flat bed home.
Welcome Philip. That car looks gorgeous. Use the brotherhood to get the information to sort out problems. Its all here. Phil Price, Lancashire...
I tried this but it made no difference presumably because the relay is in good condition. I also put in relays to improve the grounding as...
I got mine today. Brilliant. Thanks. I'd love to do some pics of mine if you do another. The Brotherhood rocks.
Oops, sorry, Missed that. I should learn to read.
Money sent. That should be 20 now.
Gothspeed. Unless you have a good reason to go for kevlar,dont. Organic plates make a much smoother, nicer, less prone to judder clutch. Kevlar...
ND, Paul Hills slave fits the OEM 348 flange as long as the spring centres are the correct distance apart. I think the later models which are...
All is well. Paul Hills 355 slave fits perfectly, Triple seals and o-rings done. I got the friction plates re-lined at a cost of £105. The pedal...
tmobileguy. Yep, it looks like a 355 Valeo slave and measures up the same. I have ordered one from Paul Hill which he sells as a 355 part, and a...
No mysteries here. The plates are worn to the rivets - way past spec. The pressure required to operate this sort of diaphragm spring increases as...
I wondered about fluid leaking onto the plate, however the clutch has done 20K miles. We'll find out later. I'm going to pull it apart this...
Thanks all. I know fixing it's not a big deal. I'll take some pics as I pull it apart. The real pain is the inconvenience of it letting me down...
Merrily driving along, I depressed the clutch. There was sort of a bang and a lurch and then no resistance under the pedal. As I was still going I...
Triumph Spitfire 1979 - 84 Audi quattro turbo 1984 - 2004 (wish I hadnt sold it) Grinnall Scorpion 1997 - 2005 F348 2006 - Loads of really boring...