© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Appreciate all the replies guys- thx! I’ve put about 15k KMS since the rebuild (euro odo in kms). It’s been completely trouble free
Thx! I appreciate your opinion
Good eye on the forward motion of the leak....I did verify with a dental mirror that it originates at the bearing. I’m guessing that it is slung...
Thx guys! Minor is my impression too. I just wanted to make sure I wasn’t “whistling through the graveyard”. Appreciate your taking the time to...
Good afternoon, changing my timing belts at 4yr (~3k mi). 8 years ago I pulled the engine to address a timing case bearing failure (among other...
I found a torque value in the WSM (18lbs-USA only note?), but no guidance on thread sealant (pipe thread).....I want to be careful not to...
Good Morning, I was wondering if anybody had ever changed the coolant temp sender through the valley- oil filter side. It looks like if I remove...
Hello again and thanks for everybody’s suggestions, Just to close the loop on this- problem solved. I went through both sets of leads, extenders...
I agree Iain, not going to adjust anything. I calculated that the bypass screw is a very simple “return to” adjustment. Thx for the thought..
Great question. It’s the only thing I’ve tried so far- with the car warm and idling, an adjustment to the idle speed results in a temporary (while...
Thx Ian,- that’s the route I was leaning....I was just hoping that somebody had this exact situation before and could say- “I know exactly what...
Good evening. A new problem has just suddenly developed. 1983 308qv Euro. I’ve never had any previous problems (nor made any adjustments) with...
Good evening.....I’m also interested- I’ve been eyeing that lift for a while. 20% would be a done deal for me:). Thx for your effort!
Thanks gentlemen, that's exactly the helpful information I was hoping to receive! Thanks, Greg
Good evening suspension gurus, I need a little advice. I've had my 84 308 for about a dozen years now, and in that time I've had my hands in every...
Thanks gentlemen. I'm familiar with the process- I was just wondering about the real world compatibility of the 2 products from those that had...
Sorry, I should have added- this is for a 1984 308 Thanks!!
Good evening all. Currently doing my annual fluid flush, and would like to switch to Zerex G-05 on the refill. I've searched high and low, and...
Al Pinkowski at Gt Motorports in Pewaukee WI is a solid bet....also, for "events", I recommend Cars and Coffee- Lake Mills WI on the 1st Sunday of...
As cooling system cools down, air can be pulled though a weak clamped hose, etc- without actually leaking any coolant. Very little heat is...