© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Guys, thanks for all your help but the electrical stuff is beyond me such that she's in the shop with the ex-ferrari dealers. I'll let the pros...
I had the stereo removed since I don't use it plus nothing beats the 355's wail. So that's possibly how it ended up there unknowingly. And as u...
The relay doesn't click with the engine running though it will de-activate the running pump (when the pump decides to run with the engine that...
Thanks!
Not at all.... I'm all ears
Will do! Much appreciate all your time on my issues
I suspect the fuse has been there a year? And thanks for the correction on the fuses as I believe that fuse/relay depiction is nowhere to be...
Removed that fuse from the test holder but no effect on the pump behavior. Removed and re-fitted the relays which makes me suspect the orange's...
Ok now I understand where that test fuse holder is, thanks!
Good catch! Yes, I believe there was a fuse sticking out of that area, one that is placed perpendicular to the rest? Will zone in on that too!...
Got it, thanks! Will report back tomorrow hopefully with some results.
Hey Ian, Many thanks for the speedy reply and diagram. Will give it a try and post back here.
To be more concise: Engine off, Ignition on - Brake pump runs as needed until required pressure then it cuts off. Pump the brakes repeatedly,...
Thanks Qavion and it is a 2.7. With the ignition on, no problems on the brake pressure and the pump will keep running to top up the reservoir...
Hi guys, Strange problem I'm having. With the ignition on, you can hear the pump running, the brake failure light goes off and eventually, pump...
It is perfectly usable on the streets. If anything, its more tractable now with the higher torque esp at the lower end which wasn't a 355 strong...
To clear up any doubts, the Unichip rides piggyback on each individual Motronic ECU. The factory injectors are more than sufficient for this...
Hi guys, Not checked in for a while. Engine has been broken in, serviced and went for a re-map of the ECU to optimise timing, fuel mixture. So...
No added work other than polishing up the existing ones
Great, thanks for that Ken. Much appreciated