© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Did you get a ticket ?! ;)
To be sure II will check when back home after 17 april. I have a part of loom coming from the center console, going to the left side of the...
Thanks for confirmation. I wonder if the transistor BKL 3B (without that A) would work on our US cars. Also if coil from Testarossa AEI 500 B...
Thanks for that ! Is there an other loom part that is going from cabine side to the engine space that goes trough a hole on the driver side about...
Great job Jens ! A few questions.. Can you take some pictures of the hole where your lower wire loom is passing from the inside to the motor side...
Thanks Alan for your offer, but I'm looking for the original model of Magneti Marelli like on the 1e picture.
Fuel in the tanks ? fuel meter can show incorrect level.
Hi, I'm looking for a GOOD WORKING pair of 328 US model coils. Model is Magneti Marelli AEI 500 C. If you have only 1 coil, you can contact me...
I learned something new today ! I did not know QV having crank position sensors...or maybe it has on other name. ;)
I see you're in Alabama right ?! No need for that cold start injector in your climat. Just disconnect the Bosch connector of it But you have to...
yeah, off topic....there are 24 different beaches over here, so I have choices. ;) [ATTACH] [ATTACH] [ATTACH] Show us some beaches from...
I used the screw holes from that stainless cover and a very tiny plastic tube they sell with paint/wax containers.
You ask for it = [ATTACH] Sorry guys...I don't want to make you jealous...
Each year I hybernate in South America for 5 months from half november until end of april. So boards can only be send from Europe between may and...
I did work together with Joe from NY to complete the internal wiring diagram for the fuse panel. I was a 3 months epic surge to finish it without...
Please remove the carpets on the inside of the sills ! Look under the roofing kind of isolation on the floor section in the lower corner. Also...
The weakest point on the OEM boards is just those connectors that are to small for the maximum current that can go true them. Once they did heat...
Replacing the wire connectors with other bigger connectors in brazz and cutting the white plastic wire connector holders is indeed the only...
Odd, you still have to service that GT part board every 2 years !. Havent looked at my board since installing it in 2007. Just looking the fuses...
All those "extras" makes those cars so special...called "patina". :) Exotics like ours have a historie and each owners did put his mark on it....