© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Does anyone know the proper torque for the #21 nuts in the picture? I know the #11 bolts that attach to the crankcase are 25nm. I in no...
Where did you get yours rebuilt? The ones I am finding are orange.
Bosch would not and could not recommend any replacement or interchange part for the injectors. :-( However, seeing the parts info here the...
I was looking to have my injectors rebuilt and came across some things that I wanted to inquire about: 1. Replacement for the 94 348 Spider is...
Thanks for the input guys, I will look for the Hondabond HT recommended here.
Just curious, does anyone use any sort of gasket sealant when replacing their gaskets during their major service? 1. Valve Covers 2. Water...
Did some work looking where I could re-use shims to accommodate my clearances. Anyone have any thoughts? Is this the right direction to go? [ATTACH]
Just finished measuring and re-measuring the valve tappet clearances and each shim using a micrometer at the centers and outsides. I am shocked...
Between, heat, PB Blaster, and CRC Freeze and 45 minutes of pulling I finally got it off. Bad news is I bent the toothed wheel a little in the...
Thanks guys, I will pick up the two products and have a go at it this evening again. I hope this makes it come off easy, will have to clean it up...
I am attempting to affix a degree wheel to perform TDC. I was easily able to get the large 36mm crank bolt off but the crankshaft pully/toothed...
Put these on last year.... [ATTACH]
Yes was going to talk to Daniel at Ricambi for the bolts tomorrow...
Awesome.....thanks much that is exactly what I needed to know!! Not sure I want to cough up the $$$ for new rubber to change the tire size with...
Hey Elgin! Do you have a comparison when you had your previous tires on the car? 215/45 and 275/40? My new set is coming with the OEM...
Hey everyone.... I will try and make the May 4th...sounds like it could be fun! I plan to take the car out this coming weekend...after a...
I just picked up a set of 360 wheels for my 94 Spider. Still waiting on their arrival but I have been reading these threads for some time. It...
I was feeling adventuresome this afternoon..... I took apart the right side and noticed two spacers in both the top and bottom of the caliper...
As I was putting back together the rear wheel sections I found that the caliper was not centrally aligned to the rotor on the offending side....
I have been thinking the same thing, I am going to test the fit of the new bolt I received from Ricambi (thanks guys) and try then on both sides...
