© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Also measuring the difference in the heights of the mounting points on a control arm will let me know where I’m at with regards to rake. Been...
Thanks for posting Mitch. I thought I had read in several posts that the lower control arm mount forks are different between the 348 and 355....
I added some 355 data that I took from some other threads. 85-115mm has been recommended as 355 ride heights (track set up) measured to the frame...
Here’s a pic of a spreadsheet I did with all the 348 numbers but in the rear I’m using the dimension of the offset 355 forks. The 348 straight...
Hey all, I have some questions about the differences the way these cars are set up. People talk about these cars essentially having the same...
Thanks that’s good advice! There’s an scca ax next weekend that I was going to run at but all the practice sessions were full so I was only gonna...
Here’s a video from 2019 with the Alfa club at laguna seca. The nsx club was there so if you can sit thru the it long enough you can see how they...
This^^.. what Mike said.. and if you’re really into it modify the lower control arm forks (start with the fronts) for more camber. I’ve just been...
Hello, Not sure if this is the right section to post this. I’ve been trailering up to laguna seca 2-3x a year from San Diego area and am looking...
Ok thanks for link but maybe I didn’t ask the right question. The throw out bearing is where it is from factory… but with the new pedal and mc I...
Couple pics. [ATTACH] [ATTACH]
Another 20lbs getting rid of the abs…
Hello, I’m wrapping up a Tilton pedal box installation. Anyone have any tips for setting/adjusting the throw out bearing travel? Thanks for...
Kinda living the lightness thing … thus was Laguna Seca March 2022. I just went up there end of July and beat my all time best by 4 sec. Anyone...
Also u want to heat the case… don’t just use the massive force the jack rods can create.. it slides out pretty easy when the case is warm. Some...
Here’s mine. Made this last year when I snapped the prop shaft. Doing the clutch shaft is a piece of cake compared to a complete tear down and...
There was a graph in the manual so I inputted and converted to psi. Thanks again for mentioning this info is in the manual. A buddy helping me...
Thank you! Priceless info in the thread you referenced and you already crunched the numbers. Sounds like the new valve I’m thinking of...
Oh man found this very informative thread and it seems to refer to these parts that I referenced. Might be smart to bypass the factory setup...
[ATTACH] [ATTACH] [ATTACH] Hello, I’m installing a wilwood adjustable brake bias. Attached are the graphs of how it controls rear brake...
