© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Parking brake on the 355 uses shoes inside the drum and do not use any component of the service brakes. Parking brake left on isnt going to affec...
Its been working for me for the last month
Temps will be 40-70 degrees typically, plan for abrupt weather changes and rain at any time. Mosquitoes will be something to plan for. Keep...
If someone has a Leonardo and knows where to look in the Proxi, stored in the body module you can change the proxi to a black tach/instrument...
Likely one of the exhaust bypass valves. First check they have proper vacuum and that the diaphragm hold vacuum. if it is indeed the bypass...
Your problem is not with the Clamb shell cover. You have worn components in the kinematic that operate the wings. Often there are a lot of worn...
[ATTACH] Yep, I don't know the actual production dates that used the plastic pulleys but later 308 and early 328 have plastic pulleys molded...
One thing to inspect very carefully especially since I saw several pictures in this thread is the plastic timing gears. Many of these cars...
Rebuild Masters here in the US has done at Least a dozen sets of Magnaride shocks for the 458, 599 and California and all have been great, and...
Keep in mind the Ferrari Turbos have engine coolant going through them as well as engine oil so they run at a much lower temperature. Several of...
I cant speak for Ferrari's replacement boxes as we don't install any. We just repair/rebuild in house. Once the boxes have been repaired...
Early cars especially california's had issues very early in life and a lot of them were wiring issues inside the box. Loose connectors, improper...
I assume you are scanning the gearbox TCU and not something like the ABS system There are Three pressure sensors in the California gearbox, System...
My first suspicion would be someone either replaced the backlighting or replace the gauge faces and took the needle off and did not get it back on...
I am in need of the rear brake caliper pad retaining springs and clips. I believe these fit 365 BB, 512 BB and BBI, 400I and perhaps 412. At...
You cannot properly do a timing belt job without removing the cam covers to properly set timing, especially important on the 355 as it is one of...
As these cars age there are a lot of items that need to be considered. Literally have a 24K mile example in the shop right now. 2 oil supply...
Providing it isn't a 1999 or early 2000 which requires the top removal for access.
It was covered in the factory training I attended.
The four-wheel steering does require specialized equipment and scan tool software to properly align and calibrate the rear steer.
