© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thank you, that was exactly what I needed. john
Posted on your other thread. john
The 1554 error probably means there is oil in the connector of the left side intake variator control solenoid. Oil travels up the wire then...
I spent the first few years of having my 430 chasing rattles, after 11 years of ownership I’ve given up now, lol. There is a very distinct rattle...
Hi Guys, I’ve currently got a small leak coming from the timing chain cover, I was looking for the removal procedure in my workshop manual but...
I've been running 360 disks on my 430 for about half the time I've owned the car which will be 10 years this year and coming up for 40k miles,...
I went with Agency Power headers, been on the car now for years, never had a CEL with them.
The errors i'm getting are below, exactly the same errors I got last time. 6016 - Plausibility of Magnetic valve current and lock pressure More...
When I put a voltage through the old solenoid it actuated, the procedure with torque was adjusted from 15NM to 9NM, I can't get my head around 6NM...
Hey Guys, Had my 430 for nearly 10 years now, done 38k miles and I'm about to replace my e-diff solenoid for the 2nd time. I still had my old...
So they say :) I've been running the brembo's on my 430 for a long time and lots of miles and have not noticed any difference whatsoever :) John
It could simply be air in the system, probably the first and easiest thing to try is a system bleed before changing sensors or pumps. John
Tried to PM but your PM box is full :) John
Main dealer replaced mine with Hill Engineering block, didn't have a problem with it at all. John
Is the xpro3 only available on Android? I've got AE but would be good to have something on my iPhone that i'd have with me all the time. John
Great videos Dan, the header swap made me laugh as I relived all the pain in the ass issues from when I did mine :D John.
Have you used the AE software? John.
Is it just a small increase in revs as the gear changes? if so mine does this too. John.
it needs to be 9NM. John.
I've used the tow hook with a clamp and gopro mount multiple times with great results. John.