© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Can you verify if the case was glass beaded? I have 50lbs of walnut shells ready to go but I'd swear glass bead looks better.
I'm glad I was able to help with some insight. Side mirrors definately go up there on the scale of buying a new clutch for an F1 car lol. The...
Still love that video! I remember six years ago the night I bought my 348. I must have watched that video about fifty times in between purchase...
How about the bearings?
Due to the fact that the wavy washers that Ferrari uses like to crack I consider them one time use only. I would like to get a 100x of both 6mm...
Can anybody confirm that which way the shafts need to be driven out? I know that the layshaft needs to come out first and it looks like it needs...
Bump Can anybody confirm that which way the shafts need to be driven out? I know that the layshaft needs to come out first and it looks like...
Definately not factory! The pans use anerobic sealant not RTV and by the looks of it it was never cleaned and sealed properly.
I have some rare earth supper magnets that are the size and shape of a 10mm nut. I could send one to you and you could try the string trick....
All the needed tools are in house. This box is getting taken down completely as well. Drivers side is already fully dissasembled. From the looks...
Yep tried it, and got it pretty damn hot but does not budge. Don't want to go super extreme with heat though as it is possible to cook them...
58K miles first take appart judging by white RTV still on differential splines Problems spotted thus far: 1) Clutch shaft wasted (New shaft...
Has anybody been succesful in removing the pasenger side gearbox bearings without destroying the cages? They will be replaced but I hate to have...
Redline 75/90W NS seems to get kind of funky after a year. I'm not sure if there could be an additive that is hygroscopic but it seems to...
Pull fuel filler neck/tube and associated internal sleeves and inspect imeadieately. Or just have a truck full of Halon follow you around!
Luckily for me it's just the belt! Still holding a 34" waist at 37.
ROFL not to discourage you but let me translate. "Patience is a virtue" Sun Tzu. 4 hours for engine removal=Broken **** 2 hours to get the...
Hell my own waste belt get's changed out long before the timing belt is due so I consider that justification for keeping the service at 30K or...
Find a shop using a wheel balancer than can measure and correct for radial force variation. See my link below. I think they can check for bent...
So sorry to see this! That's why there is a law in California against driving and talking on the cell phone. Does anybody know how long you...
