© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Tnx 4 your reply! I did read the cooling system of a 328 was different but never thought it was that different....back to school I guess. Once...
Unfortunately no,no picture. It does have the rubber seal and it fits perfectly. When I turn the assembly around and look in the top of the two...
When replacing my thermostat yesterday for a new, original, one I noticed the bottom of thermos (ring) not touching the body of the housing so...
ajajaj, after two days of hard work and rebuilding an as good as new waterpump..... indeed, the o-ring was the cause of the leakage.... At least...
I'll let you know when I have the time and the water pump arrives.... ( it will be about two weeks) Thanks for the heads up anyway. Richard
Thanks for all the quick replies! I checked the hoses ( sleeves ) this morning and it looks like the water pump went bust.... Well, at least I...
Hi, Especially on the right hand rear ( 328 GTS) there is a coolant leakage when the engine is warm. After partly disassembling it, it looks...
Looks like they only used shorter springs....tnx! I'll keep looking.
TNX for the reply! It was worried....and couldn't find an other post about it....
Hi, The suspension on my 87 328 GTS is lowered by 40mm... Yes, it does look nice however I am getting really annoyed by all the speedbumps in...
Hi, My 328 GTS (87 US) is running smooth again however I haven't noticed before that the exhaust pressure at the right hand side is much higher...
Hi, I was busy rebuilding my original switch ('87 328 GTS/US model) and was almost finished when the last spring shot away and disappeared.... I...
I found the data plate or "vehicle identity" on ferrari.co.uk. 130613 or 129846 for 27 pounds. Good luck! Richard
Jeff, I got a steady light at 38 mV.... I guess I did something wrong (my test circuit must be drawing too much amps). Today I was still...
I'll take the measurements tomorrow when I'm trying to find out why the car sometimes has trouble starting when cold. (which I fixed earlier but...
First: I agree thermocouple polarisation SHOULD matter however, I build a millivolt supply unit and did some testing, polarization doesn't matter....
replaced the thermocouple with 62691800 and made a test-circuit. Warning light functions and to whom it may concern, polarisation doesn't matter....
1) Idling:temperatures (COOLANT AND OIL) rising to normal values and fans kick in at about 195 (90 C ; mid position on gauges), the fans go off...
By the way, The box my thermocouple is connected to has the following markings: BC-USA A-12305 I'll post when I find out if the...
Thanks Mike! Both water and oil.... They changed my gauges to Celsius just before delivery 19 years ago (American model meant for Japan...
