© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Try: Mostly British Automotive 12101 New York 12E, Jefferson County, NY 13622 · 98 mi (315) 649-2861 He has 3-4 parts cars there. Prices are...
Ah, Series 1, mine was '84 Series II.
raemin Where's the fog light switch? I don't remember one; my stalk lever flashed the fog lights but not sure I ever turned those lights on with...
One good thing on the fuel side; it was likely prior to ethanol in the fuel in TX. Ken
Bob, you surely are a glutton for punishment or adventure!! Ken
Didn't cams change for FI vs. carbs?
Will inner wheel arches need to be modified to get those carbs / air cleaners in the 250GTE?
Raemin I was able to fix the horn honking by just bending the offending tab back flat and out of harms way. It was not worn, just bent up. Ken
I spent a lot of time with this horn wiring due to random horn honking while turning the wheel. I eventually solved that, but I learned quite a...
On Series 2 400i, the emergency cables come thru a hole under dash close to firewall and side of car on each side. Use some kind of plastic...
The shims are used to center the disc in the caliper for any manufacturing differences. I would not want to use a shim on top and none on the...
Raemin When I replaced my cable, I added a "booster" spring to the tensioner to keep the cable in its pulley groves. Ken
Dan Do you have a wiring diagram? I had a 400i Series 2 for 16 years and solved multiple wiring issues. I had a print shop make a couple LARGE...
Use good oil of correct weight and don't leave car idle for months at a time and quick start will not harm engine. Oil pressure light has its own...
You are asking if something lasted more than the original that lasted 30++ years!
Yes, I had this problem as well. I've sold my car now but would like to hear some commentsd. Ken
Most people find that when they check valve lash it is still in spec. Are your valves noisy? Same for timing chain, is it noisy? There is an...
My recommendation for distributor work is David North. In is in NJ, near NYC. He usually runs an ad in the FCA monthly Newsletter. PM me for...
You will need a partner to raise the rpm while other person is under car with the timing light. You need to be sure your car is very stable in...
OOPS! Yes, two power wires needed for up and down. Ken
