© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
You don't need to spend that much. Get this bracket https://www.jegs.com/i/Vintage-Air/960/15815-VUB/10002/-1 And get this compressor...
You'll need to bench bleed it, but you won't be able to actually do that "on the bench" you need to get one of the bench bleeder tools you can run...
I took all my smog stuff off from my California car. To put it back would be trivial. Add the pump and bracket, and connect the pipes.
I'm guessing you ran new lines? On mine there would be no way to cross them up... not enough length on the pipe. Sorry can't help otherwise.
Wheel bearings are completely steel... so yeah, but rubber bushings not necessary at all. If you are having to do some gymnastics of heating or...
Yep I started that way... but after one arm decided I would rather just get a press and do it the easy way. And it is infinitely easier with a press.
This is where those sensors screw in, the little holes on the side should ahve a couple sensors with wires connected. [ATTACH]
The high idle at startup doesn't have anything to do with the smog pump. Your Dad probably removed it because it's not needed in states where you...
Sorry to hear about your Father. Sounds like a really cool dude. Awesome that you are taking care of his pride and joy.
That's the exact press I have. You won't have any issues, unless of course you don't grind the weld... then you will :) Grind the weld on the...
I'm fairly certain if you do have to replace the synchro you'll have to pull the motor... mine had to be pulled to replace them for 2nd, 4th, and...
Not surprising they recommended the wrong belt. Their "kit" is kind of... terrible? Had I to do it over I would have followed one of the very...
Awesome glad I could help.
I have the same setup. You want the Gates 11m875 belt I got mine from here: https://www.biedlers-belts.com/gates-11m875-belt.html It's not a...
Would love to see those.
Can't see it, what the heck is an HEIC file?
No one ever accused me of being smart that's for sure :) When I got mine it was for a couple of reasons. I had to replace every hose in the...
Get an Airlift, simple, done. I now don't dread refilling the coolant. Use my Airlift, take it for drive, open the bleeder on the thermostat, and...
Awesome glad you got it figured out man :)
Wish I could help man, but as I've never done this I'm not qualified to answer and don't want to give advice that's probably wrong.
