© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hi all. I am chasing one or a pair of Marelli Ignition MED 805A fitted to the 308QV and Mondial QV. They can be faulty / not working ( all the...
Happy to do that but I am away until early February
I believe that the front wheels - 7x16 part number 111965 and the rear 8x16" 111966
Thanks for your encouragement - re the difference, the 308 wheels have and an extended/ protruding hub whereas the non - ABS 328 does no twith the...
Hi all, my 85 308QV is fitted with 16" 328 non- ABS original Speedline Ferrari wheels- 7" front and 8" rear. They are in immaculate condition....
The pickup tube was replaced or remanufactured during a previous ownership I gather during an investigation of the loss of oil pressure on tight...
Does anybody know the correct clearnce from the bottom of the oil pickup to the sump in a 246?
Don't be too hasty. I found a replacement that was in the same pressure range and was for the alpha - works perfectly on my 308QV - just needed...
Thanks Paul, very helpful
Hi all, I have an Australian delivered 308QV fitted from new with a Clarion 990 stereo radio. Does anybody know what radio keys would be used to...
Hi, do you know if your existing igntion modules are the 805A? If you not sure the model number is on the units which are in the below the floor...
Can the drivers seat and the passenger seat be interchanged in the 308QV? I realize the seat mechanism itself would have to remain but would be...
Thanks Pete and all others for clarifying the situation. Will advise if I have any success. cheers Lynton
I would appreciate some clarity on the part no. for the ignition module in my Australian delivered 85 308QV. I have found confusing information....
100LL has an actual octane rating of 102 and as has been correctly pointed out, has significantly more lead than leaded motor fuel and burn...
The tyranny of distance with me in Australia makes it more difficult and costly to use your unit as a test. Perhaps if I can obtain a faulty unit...
I imagine that few have the expertise to trace the circuit and determine the equivalent components. However, in some cases as I found with my...
Thanks all for your help and views. I also believe that the glass cars were all dry sump.
Has anyone locally had a look at this car? http://www.finecars.cc/en/detail/car/7036/index.html?no_cache=1&cHash=8464ffb08b I have emailed the...
