© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks for that. Yes it is in the handbook!!
How do I reset the service warning light please?
Thanks to you all for your suggestions. I took the car to The Ferrari Centre in Maidstone Kent today. Roger test drove the car, removed the airbox...
Has anyone ever replaced a cam belt one tooth out? I recently replaced the cam belts and find that the engine under load at 2,500 rpm and above...
Drove it today without compressor and without alternator and it's still clattering!
Didn't remove heat shield. Will not clatter when stationary at same revs. Needs to be under load. Cam timing is all good, not a pre-ignition...
Hi Johnny, Yes it's new. Only appeared after the cambelt change. K
Hi Andrew, I am in Horley near Gatwick Airport. K
The "clatter" is a metallic noise that is in time with engine revs and occurs when engine under load e.g accelerating in any gear. Comes in at...
Thanks to you all. I changed the oil to 10W / 50. Unfortunately no difference. I will do as suggested and start by removing the a/c drive belt to...
I think I will change the oil! Thanks for the advice.
I have just replace the cambelts and tensioners on my 1984 Mondila 308 QV. When driving there is a "clatter" from the engine area at around 2500...
Does anyone know if 18 inch 360 wheels may be fitted to a 1984 Mondial QV please? Thank you
I have a 308 QV Mondial with Michelin TRX 240x55x390 tyres and wheels. I have seen threads suggesting it is OK to use the Dunlop SP Sport 2000 TD...
I have a 1984 Mondial with a leaky hydraulic seal on the clutch slave cylinder. Does anyone know if and where I can buy just the seal, preferably...
It was the relay. Iswapped it out for the horn relay which is the same part and it worked. Thanks for your help.
The constant interior fan on my 84 Mondial QV is not running, the heater / A/C fan will not work and the heating / cooling push buttons do not...
It is definitely sparking. How do I check the injector and this cold start device? Any ideas? Thank you.