© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Superformance in the UK have alloy replacements on their website for around $600 a set or standard ones for $220 each. I’ve used them as a...
I have checked with the company that I use to make gears and they said that they can’t do anything with the gears. I have a company that say...
Thanks Romano. Larger gears aren’t an option as the centre line of the gears is fixed because they need to line up with the crankshaft drive gear....
Here is a photo. As you can see the pump walls are badly scored [ATTACH] Sent from my iPhone using FerrariChat
Yes, it needs replacing. Ferrari say it is no longer available to buy new. Do you have one? Sent from my iPhone using FerrariChat
Does anyone have the engine front cover that incorporates the oil pressure pump? Looking for either new or used. Please let me know what you have....
I will check the duration when the engine goes back together and report back. Sent from my iPhone using FerrariChat
I measured the valve lift on my 512BB cams tonight and it is 8.10mm on both the inlet and exhaust. I guess I’ll have to assume this correct. I’m...
Thanks Sam, I have that manual but all references in it relate to the 365BB unless labelled as 512BB. I am sure the 512 cams are different from...
Please, does anyone know what the valve lift is on the inlet and exhaust camshaft lobes on a 512BB? I cab't find this spec anywhere.
The underside is just bare fibreglass with the cloth folded over the edge. Looks messy but that is how the factory finished them. I’ve had a few...
The wheel cover is indeed covered in black cloth which matches the covering on the surrounding parts. I would think you would need to recover...
I am in London and he shipped it to me without problems. I seem to recall he charged about Aus $200 to ship it with DHL (and this was in clouded...
Hi Jean-Paul, I had a spare wheel cover made for my 512BB by friend in Australia and it fits very well and looks just like the original. The cost...
M Sent from my iPhone using FerrariChat.com mobile app
My 512BB is chassis number FB102*24927* with engine number FB102B000*00302*. All confirmed as original by Tony Willis here in the UK Please note...
I see that Superformance have one of these at £150 and Maranello at £220, both in stainless. I think I had mine made for a lot less than this...
I remade mine in aluminium in 2006 and they are still 100% as far as I know. I sold 365BB in 2019 but know the new owner. I suggest you just wait...
The two aluminium pipes that run through the tunnel tend to corrode my guess is that these need replacing. You need to have the engine out to get...
Hi Drew, these fittings are just a push fit. Try sliding a thin screwdriver between the white plastic elbow and the black rubber piece. You should...