© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
The cigarette lighter socket is always "on". You can plug a battery tender or a charger in there but do not exceed the fuse rating of that...
I used to own a Porsche 928 and that is what the jack looked like.
Copper and some other metals "work harden', that is any mechanical deformation will cause the material to become harder or stronger to some...
I can well imagine that the vibrations that are normal might cause an adjustable pot to give trouble. If this is the case, the best fix would be...
If anyone can post a scan or close-up photo of the two-pronged key with a ruler or coin to set the scale I can probably fabricate several easily....
I have an US 86 328gts and it also has the lock system with two tiny holes!
I have made a number of small keys to fit various old locks. If anyone can post a close up picture of the key with a ruler or coin nearby to set...
The easiest way to verify your speedometer and odometer accuracy is with a GPS device. Drive on a straight road at any speed you like and compare...
Hwy 197 connects to I84 in The Dalles not in Hood River.
Many sources indicate that 80 to 85% by weight is the optimum amount of R-134 when converting a system from R-12.
The TDC pulses are 180 degrees apart. I have not tackled the rpm sensor puzzle yet.
My curiosity led me to look at the signals available on the ignition diagnostic connector located on the driver side of the 328 engine bay. After...
There is a sales tax in WA. You will pay about 7% to get your plates!
My fabricated 328 emergency window crank. I guess this is "HOME" not "OEM" version!
Thanks redhead. The 88 parts book does not show this crank, but now that I have seen the image I will fabricate one.
Speedy, I am familiar with the 308 crank that you refer to but that is a "male" crank that would engage a broached hole in the window lifting...
My 328 has small access plugs near the door handles which cover what appears to be openings for an emergency window crank. Removing a plug...
The high pressure AC fitting on my 328 has a 7/16" -20 male threaded portion. I believe that this is the same thread used on 1/4" diameter...
Testor model paint (enamel) is widely available. The red is a near match and with a careful tinting using a small amount of black I was able to...
