© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Thanks. The plates seem to be within specs, but very oily(for a clutch) I will replace the O rings. I will also replace the clutch assbly while I...
Plus of course the rear grille, the engine cover, the strakes
I thought my clutch was going too. Bought a new kit (AP racing), but the thicknesses of the new clutch plates are extremely close to the old ones...
Replace all the air intake air filter housing etc with two K&N filters stuck directky into the rubber elbows to the throttle. I was amazed at how...
Not that simple! What the dyno drum measures is actually torque, which the processor converts to horse power ( or kilowatts). Power readings...
Vincenzo Weren't you going to give us a schematic of your dolly with some measurements?
To add to what James Selevan is saying about oil change frequency I seem to remember that Dennis Jenkinson- Sir Stirling Moss co driver- drove his...
Shamille, Considering that you have checked most of the reasonable issues it may be time to consider the more unlikely causes; is your car...
Right now I am up to an estimated 600ft lb and it still won't come off.And yes I applying the torque in the proper direction
If you ugly or disgraceful doe anyone knows what THIS is? [ATTACH]
And what about the gearbox transaxle that could set you back 15grand?
The front wheel offset provided by one Fchat member is 34.2 mm., and in fact this is close to what I can measure. But the wheel is stamped with an...
Hopefully you will let us know who made it, what it cost you and how well it works. If they made one they should be able to make several. Maybe...
The latter. I removed the cats(and precats). It is a US version F113A 040
If this is any help I scaled my 87and got 730 kg front, 930 kgs rear Total 1660 kg or 3656 lbs, with 1/2 tank and 70 kg of driver. No cats.
Mine is a two plates clutch, but I don't think it matters as far as the throw out thrust bearing is concerned. Hope these attachments help. The...
Before you do much cranking I would check the belts
Bushing worn out, or some other suspension attachement could do that. Does it click under braking?