© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
After inspecting the soldiers better I found one that was cracked so I resolidered both power connections and problem solved. Thank you so much...
Here is a pic the circled pins are that of the two that should be powered [ATTACH]
So you happen to know which terminal on the plug side would be the so I can test that for continuity I have it opened up not seeing anything major...
Perfect that gives me more confidence. I will give you an update as soon as I get it apart and inspect it. Thanks again for all your help.
Before I tear into that relay panel is there a contact I can test to confirm it’s within the panel and not a wire inline? Or does the jumper...
Ok here is the update I tested the correctly functional relay in slot e13 left hand injector control and I’m getting power on terminals 30 and 86...
Ok sounds fun hahaha I’ll pull it out and start the party tomorrow hopefully uncover the truth behind the problem. I’ll keep you posted as I...
Are you referring to the relay/fuse board or the ecu internal board?
And it was intermittent (the lights) but now it seems like it’s just not working at all. Won’t start anymore fires off dies quick. Like it’s only...
I am only getting power to one of the terminals in the relay socket for 1-4 and two sockets for 5-8
Are the ecu for the right and left the exact same can I simply swap them and see if the problem migrates or stays? Obviously if it migrates it’s...
When I unplug the relay and plug it back in I can hear it engaging the same as the one for 5-8. Could it be the ecu had failed and not completing...
After if shuts down it starts running crappy and won’t stay running and it turns over fires off and won’t stay running.
When I got the lights to come back on in the on position then car started and ran as it should and When it begins running rough it seems like it’s...
Update: I tested pin6 for power I am not getting power at pin 6 it seems as if the e i is not powering up on that side
So the other day I had opened up the relay panel after I noticed the lights were not coming on and they were not illuminating then I stumbled...
Great thank you very much this will help shed some light on the situation and hopefully get her up and running well again. I appreciate your quick...
I was hoping you could also get me a link for the 2.7 diagram I have someone going on between relay box under foot pane and ecu cel 1-4 not...
thanks for all your guys input i will make them send the right tires out to me. stevewhat did it cost you to lower your car?
you have the same one if i remember from your pics correct.
