© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hi Gary, Years ago, I had no end of problems with my old 1983 Mondial QV. From an ignition POV I had discovered the "ballast resistors" that are...
Use a Karcher pressure washer like me driven off a bucket full of water on the drive - not connected to the tap - just fill the bucket when empty...
You guys make me smile, here in the UK I paid yesterday the equivelent of almost Eight dollars per gallon (It's £1.30 per Litre)
I've been browsing their old site for years and enjoyed looking at some of the handbooks you could download as pdf's. Tried it last night only...
I had my Mondial 14 year 4 months, I miss it a bit but now looking for a 996 turbo...
I have 4 Original Mondial QV wheels fitted with TRX tyres 240/55 VR390. Wheels and tyres in good condition between 3 and 6 mm tread left on the...
I've had the grease replaced about 2-3 years ago and they work fairly slowly but I know the relay / wiring trick would be a bonus just thought one...
Hi, Does anyone have the circuit diagram from mike tarrant's (Miketarrant) excellent article on Mondial slow windows I've found the thread from...
Guys, I've been running around for the last 12m with a set of Mondial T wheels on my Mondial 3.0 QV (1983 model). Straight bolt on and a new...
Hi, I had this dilemma last year, my research showed that only the "front" wheels from a 355 would fit a Mondial QV due to the width; - QV in...
Hi Fazioli, They are are metrc wheels with expensive TRX tyres. Why dont you go for Mondial T wheels, they are 7x16" and 8x16" with 205/55 front...
Sam, On page 78 of the superb "Original Ferrari V8" by Keith Bluemel he states that the Mondial 3.2 QV had. On the front a choice of; 1/...
Verell, If VKM22380 is good enough for you then that's good enough for me!! I've tried to look up VKM22380 on their site but nothing...
Guys, Just preping for my major service does anyone know the part number for the SKF sourced cambelt tensioner bearings Ferrari want £90 +vat...
Thats exactly what I did, not too OTT IMHO. See Pic. Mario. [ATTACH] [ATTACH] [ATTACH]
Mondial T refurbed and fitted. Enjoy.. Mario. [ATTACH] [ATTACH]
Here's a picture of a wheel installed before the refurb you can see just how bad it was, Will try and get some pics together soon... Cheers,...
Hi, Several choices are available as discussed above,4 x 355 front wheels will fit but I think you will need 355 bolts - all 20 of them. I...
Terry, I am not sure exactly what they do but one of the rears were scratched and chipped all around the edge. The fronts were terrible on the...
I've just received my refurbed Mondial T wheels (for my Mondial QV) from Pristine Wheels, - the local tyre place removed the old rubber, weights...