© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Carmel was great. Always nice down there. Great weather and great food! I rented a tandem bike with my 10 yr old son which was a kick. Never...
I did do the conversion to the 4 pin. worked out great. Mapping instructions made it easy. I got the relay from a Porsche OEM supplier. I also...
So this goes out to all of the those who participate in this forum, both experts and novices. I recently had the benefit of a protection relay...
I think we need a larger variety of cars next time. Ferrari, Infinity, Honda, ...what was the 4th? I forgot
Hi guys. I'm still here and kicking. Thanks for the kind comments on the grills. Mark, I PM'd you on the grill. If you want to keep it...
Hey Dan. Planning on being there next weekend. Is there anything I can bring? Planning on both tranny and oil change for that shifter rod seal...
So the problem appears to have been the battery connections. Fixed that last week and after 2 significant test drives, no other issues. Guess...
The car has been running great until about 2 weeks ago then this issue occurred a couple of times while driving it on the weekends. I'm going to...
So the radio is not connected to fuses 1or 2. The battery voltage reads 13.8 with the car running. I took it for a short 10 mile test drive and...
I'll have to pay attention to that. The delay really does not last that long. I'm thinking that the speedometer is still up, tach not sure.....
Got the battery out. There was a little corrosion on the positive terminal so I cleaned everything up. The battery is pretty old. Looks to be...
US Version. I'll look for the leads from those banks. Sounds like I should also check out the RPM sensor.
So I have seen plenty of posts where the Slow Down Light comes on with the loss of one bank, but little to none re: loss of both banks. Had...
Thanks for the heads up Dan! I've been cranking on work and not on the board lately.
Bill, I have made 2 of these grills for a local shop. They are black anodized and look really good. I decided to anodize them instead of going...
Just cleaned mine tonight. Looks good but I like the idea of rattling some things around in there to help knock off the scaling. Thanks for the...
Nothing really stands out as special about that model as far as looks are concerned. I thing the 3x8 design is still timeless.
We mounted the bumper with some fabricated mounts. We used 2 different sized tubes and a narrow mount plate. We matched one set of tubes to the...
Looks great on the wall! I might have to do that myself :D
That is essentially what I did with my project Mike. Once the "buck teeth" of the US bumper are out of the way, the Euro QV grill would work with...