© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
2 [ATTACH]
Here's some comparison pics [ATTACH]
YES! The plastic housings are pretty straight forward. You should be able to slide them on and off, just make sure you get the orientation and...
I have a Mondial 8 and I believe they are the same. You should have 2 identical liquid level sensors. One is in the coolant expansion tank, made...
Finally fixed mine off a Mondial 8. I'm sorry to say that all my attempts to source a new part were either futile because its no longer made or...
My engine is out so it was easy for me but after looking at the setup, I think dropping the right tank about 4" would do the trick and its a lot...
And you'll need to manufacture the tool you'll need to remove the locking ring, I still have my locking ring out if you need the measurements.
Its possible but you'll have to drain the coolant, disconnect the pipe and swing it out of the way along with the fuel tank strap. I just did...
Also, if its not too much trouble, could someone please put in here what the ohms range is? Mine is broken so I'm having problems finding a...
Also check out this website, http://www.international-auto.com/fuel-and-emissions-systems/fuel-tank-sending-units.cfm They have Fiat, Lancia...
There is one on ebay, universal for ferrari...just type "ferrari fuel sender" it looks very similar to the one pictured here
Ok so I thought it was working and everything I said prior about the bracket being loose is accurate however, there is a small brown inspection...
Part 3: also worth noting are the following...first, since the bracket is not making contact with the mounting flange except by random chance, the...
Oh wow...ok, not sure if this is everyone's problem but here's what I found...taking the locking ring off? Pain in the ass but once its off sender...
In the process of fixing mine since I have the engine out...its in the rear right fuel tank, not on top as in usual applications. More than...
I've had the same thoughts and concerns for my previous mondial8 and here's what I found; If you're concerned about resale value then by all...
Hmm mine is mounted on the upper part of the rear head and has rubber insulators so I don't think that's where it senses the heat from however,...
Just my two cents.... If you have the older style ( electrical connector on top) you'll notice a small stud and nut on the body of the AAV... This...
I've been looking at doing the same thing, currently have the engine cradle out so its easy to see how I would go about doing it. Unfortunately,...
For what I've read when I originally found the photo, it was at a car show in Austria but no guarantees its from there.