© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
David, Thank you so much for this extremely helpful reply. Regards MB
There seem to be 2 pistons available for the 308 qv, one manufactured by borgo and the other by Mahle. The question I have is whether they are...
Really appreciate all the input. Now that the shock has worn off a bit I have decided to replace all of the pistons. Its a bit complex since...
My car is originally from the UK. Would the pistons available in the US be the same for this model or are they different? I have located some...
The dreaded day that a full engine rebuild is necessary is unfortunately here. I was blowing a lot of smoke and consuming far too much oil and...
so based on the clarification above anyone have any ideas? Thanks, Dennis
Thanks to all for your responses Clarifications below: 1) The mechanic confirmed this morning that both manifolds (1-4 and 5-8) have the...
Im trying to help out a friend in Bangkok by posting for him. Below you will see pics of the rear exhaust manifold on a US spec 85 qv. After...
Keep in mind with the falling euro these are going to cost a lot less in USD when new. Less than 2000 for sure. MB
Thanks for taking the time Steve. Really appreciate it. Mine is an 85 QV so I assume I have the later style injector as you have shown in the top...
I understand from the many informative posts on replacing injectors that for an 85 QV I need the following to replace the injectors. I was going...
This looks like a pretty good deal for the right owner. SInce a few people have been asking for cheap exhaust optionns I thought I would post here...
gently removed all the relays and replaced them over the weekend. Only a couple were hard to get out but in the end they released with no damage...
My 85 QV was very difficult to get into 2nd cold. Once we put the 75/90NS in it shifts perfectly. I used no additive. MB
Does anyone know if the injectors for the 1985 308 qv are the same for the Euro and USA versions? I believe my car could use a set but dont want...
Bwanajoe, I have not tried it but it appears that the Italmec relay can be replaced by an Tridon/Stant EP36 electronic flasher. This guy has...
Thanks all I will get the pliers out and gently remove them. I just wanted to be sure that the panel could handle the gentle application of...
As part of my ongoing upgrade of the electrical system I have just replaced my fuseblocks with Birdmans improved units. As you can see from my...
My right side (driver side in my case) mirror was destroyed last night in a minor accident and I need to find a replacement I have searched the...