© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
That would be a good chaser to the WD 40. If the window ever slows, I will hit it again with the lithium.
Guys, its a wonderful toy that is 28 years old and will pretty much never go up in value. My suggestion is to not be overwhelmed with the concept...
It was used as a thinner not a lubricant. Thanks so much for sharing your opinion. Try not to take it so personally. Know it all comes to mind...
This will last long, I have no doubt. I've done both and I wll take a holes where it has zero impact and 20 minutes over the alternative. You...
I have to thank Birdman for the orginal fix details. I fix everthing on the car and nothing comes easy. (power brake booster is next) so to have...
Use your favorite sealer on the holes. It also has a vinyl flap over the motor and speaker to prevent water from contacting it. Mine is stll intact.
Well I couldn't wait to post this in the hopes of preventing the next guy from having to spend 5 hours taking apart the power window motor and...
Agreed. I am on the phone with my parts guy in AZ looking to get the check valve. Apparently an orginal fuel pump has it built in and a repalcment...
In my previous post i meant to say no visible leaks.
I have the gauges hooked up as the link showed. The pressure bleeds off fast when the pump is shut down. It took about 2 minutes to go form 40...
Hey folks, I have a warm start problem so I bought a fuel injection pressure test kit from carparts.com but the fittings are not very good and I...
I just fixed my slow window on the driver side so i would say that the most difficult part would be taking removing and replacing the power...
How did the drive go? I look forward to joining you on the next one. It will be tough choice between the 66 and the 1983 308. A good probloem to...
