© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Hello, I'm looking for recommendations for a shop in the Walnut Creek area to do a PPI on a C7 Corvette Z06. Thanks, Tom
I can confirm that Mark's service works perfectly. The red fob that I received from the previous owner with my 1997 F355 Spider wasn't working...
Sorry for the sideways photos. They were real time. Lol Sent from my SM-G900V using Tapatalk
[IMG][IMG] Sent from my SM-G900V using Tapatalk
This is the one I have:...
My 1997 says July 1996. Guess I have one of the first 97's.
100|OCT at Santana Row. Last Saturday of every month spring through fall.
I don't think so. I didn't change them and I'm not seeing any codes. - Tom Sent from my SM-G900V using Tapatalk
It seems that the tube is mounted differently in my 1997 F355 Spider than in Dave's car. Here is a photo showing the weld. The back of the car...
Yes, all the way at the far left end of the tube in this photo.
I did not get a CEL. I would reset the codes and drive for a while. The car would run smoothly with the reset codes. Then, all of the sudden,...
There is a metal tube that runs across the back of the engine cradle. The bypass valve hose connects into this tube. On the opposite end of the...
For the P0102 MAF issue, I had this problem and chased it for 8 years before finally finding the issue during my last major service. It ended up...
Confirmed. I'm running them in my 5.2 F355 right now. I also ordered the stickers from Ricambi so they look stock. 138255D COIL PACK DECAL -...
Check your vacuum. I had MAF issues it took me 7 years to resolve. It ended up being a small vacuum leak in the frame. I had it welded and my...
I got to see one of the F50 GT's (1 of 3) at the 100|OCT show at Santana Row in San Jose, CA yesterday. Truly an amazing car. - Tom [ATTACH]...
Already done: http://www.ferrarichat.com/forum/348-355-sponsored-bradan/522719-how-repair-f355-spider-top-sensor-power-windows.html
Reinstall the cover and return the top to the open position. Verify that your windows now work properly. [ATTACH] [ATTACH]
Put the switch mounting screws back into the holes and add the roller lever. Then add the switch, followed by the bracket, and finally the 4mm...
Place some cardboard behind the wiring so that you don't melt your carpeting. Then use a heat gun to shrink the tubing. [ATTACH] [ATTACH]