© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
After adding an overflow tank to the expansion tank, I never had to burp the system again. Most of my problems were a cause of how the expansion...
An easy test is to look at the engine idling with the lights out. If you see arcs, there bad. But if they have been on a while, go ahead and...
Hey Jason, After taking a closer look I realize you have a QV and mine is from a GTSi. Not sure if there is a major or noticable differance....
If you are wanting an OEM front bumper, I have one I am replacing with a fiberglass.
Also, when reinstalling the deck lid. Before you tighten the blots, align these holes and place a pop rivet or small screw driver in these holes....
I think it depends on who and how its done. I had a shop ceramic coat a Ranger header as a test to see how it would last. With in a few weeks...
Even if the trunk area was converted to engine bay space?
Would like to do this on a 308 GTSi.
Anyone worked with these guys recently?
I believe the new model year starts in August(?).
When I did mine I put lines to show the cord path. [ATTACH] The one redesign I would do over would be to put a spring on the slider pulley to...
Try Superformance https://www.superformance.co.uk/308/ignition.html I have bought items from them before and received OEM parts. Might be worth...
Here is one of the companies I had scored from. Looks like they still sell the window flocked lined seal....
Will go through my notes and let you know. Its been a few years since I did mine, but I was able to source them online. As I recall I just bough...
I would recommend replacing the channel. I have seen where the exposed rubber will drag on the glass. There are places you can source this from...
Just curious, did you also replace the u-channel for the window frame? If not, is the velvet still visible in the back of the channel?
You will need to look at getting the caliber cleaned or rebuilt. It may only be the leaver binding on the caliper casing. Worse case is the pin...
Is it the lever or the pulley on the cable that is sticking?
It is a curving stretch of Highway One that locals refer to as thirteen corners. I believe it is between Stinson Beach and Muir Beach. One of...
Heading to thirteen corners? (if they still call it that)
