© 2024 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Tony, Thank You for that information. I will talk to crane cams. Tom
I am having new camshafts made for my 1967 330 GTC. Any thoughts on having performance cams made vs. stock. This motor has 365 carbs which really...
I bought my car in Tucson, AZ. I drove it back to Texas in September. What a fun trip! In fact, it was the highlight of my ownership so far. Make...
Does anyone have diagrams showing the pins, pin numbers, components served by pins and values of each connecting to both computors on a 1995...
If you still haven't found your gates 150 tool, I just bought the exact model called a Krikit II. It shows the tension in LBS> and KG. I bought it...
Your flexible brake line(s) could have possibly collapsed internally. This acts like a one way valve allowing the brakes to work but not...
Who remapped your computors? What changes were made? How much$$?...
My 95 355 had it's steering fluid reservoir replaced with a ZF reservoir that , I was told, is a BMW part. In fact, it looks exactly like the one...
I just replaced my manifolds. Here are some tricks to removing them: Remove the rear wheels, fender liners , Rear bumper, muffler assembly,...
One day I noticed water running down my rocker panel ( Jag E-type ). It turned out to be battery acid from my Diehard. That was when I bought my...
Fellow ferraristi, THANK YOU for all of your input. It looks like alot is happening now with the manifold replacement business. It's pretty...
Yes, I saw the picture of the headers by NA Performance. They look beautiful. I am a little concerned about them cooking wires and components in...
I need to buy new exhaust manifolds for my 95 355. I have read the threads on the QV London rebuilt manifolds and have seen the manifolds made in...
I started seeing the engine compartment doors opened after runs with the 308s in the 1980s. I do it with my 355 to help with the cooling but...
What kind of noise should I listen for from the headers? I can hear exhaust noise close to the header plugs when they are in place(using a piece...
I was wondering if the bottom removeable 17mm (wrench size ) plugs allow access to the enclosed shielded headers. I am getting exhaust noise from...
My 95 355 has synthetic oil. NO leaks and NO ferrari drops. I am using 0- 40W Mobile one.
Before you remove your O2 Sensor. Unplug it's cable from it's recepticle , spray some electrical contact cleaner on the metal contacts plug it...
Does anyone know how to remove the leather wrapped pieces from the rear shelf - window area on a 1995 355GTB. I would like to remove them so that...
My speedo worked intermittantly then finally quit. I replaced the speedo sender unit and now it works fine. Check the sender unit connection...