© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Should all 4 cams have the alignment marks line up at the same time or should the 1-4 bank be 90 degrees off the 5-8 bank?
I have been following the many DIY threads to setting the timing on a 348 and I am getting very frustrated. I want to do the work myself for...
Steve, I have the spreadsheet you published it will be useful when I am setting the timing.
I must be missing something simple but I am reading the procedure for adjusting the timing. I have read you should only set the tension on a...
I wanted to make sure I wasn't reading something into the shop manual about installing the cams. Want to confirm I can simply set #1 to TDC...
I am reading the procedure for installing the cams and it says to put cylinder #1 at TDC compression. Is there a difference between the...
What products or method have you used to get it that clean?
I bought the other tensioner pad that Dave is making, I am replacing both. This one was available from Ferrari for a while, not sure if it still is.
I have a 1990 348 and I am replacing the chain tensioners. The old tensioner and new tensioner have a different diameter opening where the stud...
Maximos if you are serious about a 348 the Italian Gathering is coming up in Columbus over Labor Day weekend. I suggest you go there, there are...
Did you replace the tan trim pieces or paint them black?
Dave When do you think these will be available for sale? Have you decided what the price will be?
I know the timing chain tensioner is not available yet but Dave Helms is working on that. I would like to know how much wear is considered...
That brass plug is already a bit mangled, it looks like vise grips have been used in the past. The 19mm wrench won't work, the corners are...
I am removing the oil pan on a 1990 348. I have removed the nylon lock nuts that hold the pan to the block. I also removed the 2 big bolts (#6...
Here is the link to the Chicago company. http://www.exoticcarshare.com/ It will cost about $1400 for a Ferrari for the weekend. I no...
I owned the only exotic car rental business in Ohio but closed it a few years ago. The closest rental for an exotic is Chicago. There is...
If you look at the diagram in the shop manual it shows the gears arranged differently. It must be that the drawing is just not accurate. If you...
I pulled the engine to do the 30K major service and found that the cam gears are in the wrong position on the 1-4 side. I don't know if the belt...
I didn't see anything in the shop manual, thanks so much.
