© 2025 DRIVEN LIFESTYLE. All rights reserved.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.
Not sure how long this has been posted on their website and never nice to see, but it might help someone..........
Thanks Alberto, do you think I should still feel some play in the wheels when tightened or should they feel snug?
Has anyone got a "rule of thumb" set up for the front wheel bearing play? I've just driven 1000K across Spain and am suspicious they have too much...
In case anyone else has this problem, Lucas electrics say you can use Lucas part number SRB521 and you match the terminals as follows: W1 =...
I'm not sure of the correct term, but terminal C2 close onto C1 & C3 at the same time on my 6RA. That switching combination is whats making it...
Does anyone know where I can get a headlamp relay? The LUCAS 6RA 33231F has burnt and I cant find this same type anywhere. Any suggestions please?
Are the Blades "handed" i.e left and right side? Mine sit differently on the screen when changes around.
Can you calibrate or adjust the speedometer needle? Mine is sat on 10km/h at rest and reads 10k fast all the time. is there an adjustment screw...
I purchased a gasket set and a steering UV joint from T Rutlands. They didn't do as they said on the website and contact me with shipping costs...
I'm pretty sure its the Diff seals as the CV joints are oily and they then flick it onto the manifold, making a nice smell! i reckon I should...
Is it possible to change the differential oil seals with the motor in the car? How big a job is it?
RS, thanks for the info. I've now had a chance to look around and have found the firewall fuse holder melted and the cable from the Alternator...
Thanks for all the pointers here guys. I'll check things out over the festive period and let you all know how I get on. A very merry Dino Xmas to all.
Any pointers as to where i might look for a intermittent electrical fault that sends the ammeter to -40 amps and starts to melt the insulation on...
Thanks guys, forcing WD40 down the cable with air fixed the problem.
The Clutch is very very stiff on my Dino, it feels like the cable is sticking inside the casing. Can this cable be lubricated, and if so how?
